| Stemhead Fitting:
|
|||
| Chesapeake Rigging produced a custom replacement stemhead fitting. The original fitting had been twisted by overzealous cranking on the streamstay furling gear. The streamstay extrusion was twisted 270 degrees and the stemhead fitting was twisted approximatly 30 degrees. The new stemhead fitting is MUCH beefier! |
Ut wisi enim ad minim veniam, quis nostrud exerci taion ullamcorper suscipit lobortis nisl ut aliquip ex en commodo consequat. Duis te feugifacilisi per suscipit lobortis nisl ut aliquip ex en commodo consequat. |
||
